|
|
Post by Chris Ratcliffe on Oct 3, 2012 20:27:56 GMT
So, I have installed the ESC and made the following settings with the newest software. Am I in the right region or is the esc or motor awaiting a small fire.  FDR - 7.14, Boost 46, Turbo 12, Delay 0.20, ramp 3, throttle profile 3. I can tell you, do not over rev with no load on the wheels. I managed to shatter the magnet into small peices on a brand new motor.  |
|
|
|
Post by scottw on Oct 3, 2012 21:26:01 GMT
Whoops. School boy error
|
|
sherbs
Junior Member
Posts: 55
|
Post by sherbs on Oct 3, 2012 22:26:42 GMT
Those settings look very familiar, apart from i'm running a FDR of 7.6
|
|
|
|
Post by Captain on Oct 4, 2012 5:59:33 GMT
I'd probably knock the ramp down to 1 possibly 2......will be quick enough and 3 just generates heat.. :-(...plus you want something to work up to...if you want more punch through the midfield, just max out the boost.... :-)....I'll not be there tomorrow so have fun.... ;-)
|
|
|
|
Post by "Super stud muffin" Fat Belly on Oct 4, 2012 16:23:17 GMT
What motor is it? Shouldn't of shattered if pinion and wheels on ! If its not an lap bin it and get one all other motors are elephant dunk  |
|
|
|
Post by "Super stud muffin" Fat Belly on Oct 4, 2012 16:23:57 GMT
Sorry LRP not lap q
|
|
|
|
Post by "Super stud muffin" Fat Belly on Oct 4, 2012 16:25:47 GMT
Apart from Novak and maybe hpi
|
|
